Jcowdy at 18:47, 17 June 2011

2011-06-17T18:47:11Z

Jcowdy: Created page with 'The routing daemon is automatically started with XINU. == Add a Route == To add a route to the route entry table use route add with the following parameters: route add
2011-06-10T20:03:20Z

Created page with 'The routing daemon is automatically started with XINU. == Add a Route == To add a route to the route entry table use route add with the following parameters: route add <destina...'

New page
The routing daemon is automatically started with XINU.

== Add a Route ==
To add a route to the route entry table use route add with the following parameters:
route add <destination> <gateway> <mask> <interface>
Example:
route add 192.168.6.0 192.168.1.100 255.255.255.0 ETH0

== Delete a Route ==
To delete a route from the route entry table, use route del with the destination as the third parameter.
route del <destination>
Example:
route del 192.168.6.0

← Older revision		Revision as of 18:47, 17 June 2011
Line 12:		Line 12:
	Example:		Example:
	route del 192.168.6.0		route del 192.168.6.0
		+
		+
		+	== Debugging ==
		+	To enable UDP debugging, uncomment the following line in include/route.h
		+	//#define TRACE_RT TTY1
		+
		+	In order to see the trace results you open another console to the second serial port using the router name followed by the number 2.
		+	mips-console router2
		+	Alternatively TTY1 can be changed to TTY0 resulting in the trace printing on the main console.