Difference between revisions of "Connect to a modified router"
| Line 1: | Line 1: | ||
Once we have the router powered up, connecting is as simple as plugging the [[Pictures|serial ports]] into a machine with the proper software to communicate over it (such as [http://www.columbia.edu/kermit/ Kermit]). | Once we have the router powered up, connecting is as simple as plugging the [[Pictures|serial ports]] into a machine with the proper software to communicate over it (such as [http://www.columbia.edu/kermit/ Kermit]). | ||
| − | In our setup, once running Kermit on the external machine, we connected by typing in: | + | In our setup, once running Kermit on the external machine, we connected by typing in:<br/> |
| − | <code>set line /dev/tty000</code> to connect to the device talking to the router. | + | <code>set line /dev/tty000</code> to connect to the device talking to the router.<br/> |
| − | <code>set serial 8n1</code> which is not really necessary since this is default. | + | <code>set serial 8n1</code> which is not really necessary since this is default.<br/> |
<code>set speed 115200</code> as given to us in the router specifications. | <code>set speed 115200</code> as given to us in the router specifications. | ||
Revision as of 18:41, 6 September 2006
Once we have the router powered up, connecting is as simple as plugging the serial ports into a machine with the proper software to communicate over it (such as Kermit).
In our setup, once running Kermit on the external machine, we connected by typing in:
set line /dev/tty000 to connect to the device talking to the router.
set serial 8n1 which is not really necessary since this is default.
set speed 115200 as given to us in the router specifications.
Once connected, you may need to press Enter to get a console from OpenWRT.
Also, because the goal is to upload custom kernels to the router, it would be a good idea to connect the router to your network by wiring it up via one of the numbered LAN ports on the back of the router (NOT the Internet/WAN port).
