Difference between revisions of "Routing"
Jump to navigation
Jump to search
(Created page with 'The routing daemon is automatically started with XINU. == Add a Route == To add a route to the route entry table use route add with the following parameters: route add <destina...') |
|||
| Line 12: | Line 12: | ||
Example: | Example: | ||
route del 192.168.6.0 | route del 192.168.6.0 | ||
| + | |||
| + | |||
| + | == Debugging == | ||
| + | To enable UDP debugging, uncomment the following line in include/route.h | ||
| + | //#define TRACE_RT TTY1 | ||
| + | |||
| + | In order to see the trace results you open another console to the second serial port using the router name followed by the number 2. | ||
| + | mips-console router2 | ||
| + | Alternatively TTY1 can be changed to TTY0 resulting in the trace printing on the main console. | ||
Latest revision as of 18:47, 17 June 2011
The routing daemon is automatically started with XINU.
Add a Route
To add a route to the route entry table use route add with the following parameters:
route add <destination> <gateway> <mask> <interface>
Example:
route add 192.168.6.0 192.168.1.100 255.255.255.0 ETH0
Delete a Route
To delete a route from the route entry table, use route del with the destination as the third parameter.
route del <destination>
Example:
route del 192.168.6.0
Debugging
To enable UDP debugging, uncomment the following line in include/route.h
//#define TRACE_RT TTY1
In order to see the trace results you open another console to the second serial port using the router name followed by the number 2.
mips-console router2
Alternatively TTY1 can be changed to TTY0 resulting in the trace printing on the main console.
