WRT54G

Transceiver from GL causes dropped characters; using Linksys transceiver

• possibly solved by "tighter" transceiver construction

Control-C interrupts VxWorks loader, as it does in CFE.

Configured to load XINU from Morbius; hangs on boot.

• remove first 3 lines of loader/start.S
• check for serial port hardware address; compatible with XINU?
• VxWorks starting arguments similar to CFE?

VxWorks will flash over itself with CFE - http://wiki.openwrt.org/OpenWrtDocs/Hardware/Linksys/WRT54G

Trouble with first attempt

Found reference to others loading non-VxWorks kernels using VxWorks bootloader, but no luck with XINU.

Attempted to load micro openWRT kernel and CFE over VxWorks

• upload failed
• despite successful upload of original firmware, bootloader refuses to find image on flash
• possible solutions are loading fresh VxWorks from network or reloading flash through EJTAG port