File:Maxim.jpg

From Embedded Xinu
Revision as of 20:15, 11 July 2007 by Phinze (talk | contribs) (Copied data from caption on Pictures page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Maxim.jpg(800 × 533 pixels, file size: 339 KB, MIME type: image/jpeg)

This is a picture of the MAX233A transceiver chip we used to convert the digital serial signal to proper RS232 voltages. Our picture shows a wire-wrap socket to hold the transceiver chip, but this was our prototype. In practice, now that the correct connections have been confirmed experimentally, we will solder leads directly to a 20-pin standard DIP socket, which can be glued on its side to the inside of the front case piece. This allows access to the receiver chip (in case an electrical mishap damages it,) while still allowing easy opening and closing of the case.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current18:27, 1 September 2006Thumbnail for version as of 18:27, 1 September 2006800 × 533 (339 KB)Michael (talk | contribs)

The following 3 pages use this file:

Metadata