https://xinu.cs.mu.edu/index.php?title=Router_Recovery&feed=atom&action=historyRouter Recovery - Revision history2024-03-29T05:34:59ZRevision history for this page on the wikiMediaWiki 1.34.2https://xinu.cs.mu.edu/index.php?title=Router_Recovery&diff=3896&oldid=prevKpersohn at 18:01, 21 June 20112011-06-21T18:01:38Z<p></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 18:01, 21 June 2011</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l6" >Line 6:</td>
<td colspan="2" class="diff-lineno">Line 6:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Before You Begin ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Before You Begin ==</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>If you haven't already, [[backup your router's configuration]]. Hopefully you did this earlier so you can restore to a "known good" working state. If you didn't, it is still a good idea to do that now; it can always get worse. You'll also want to grab yourself a copy of some reliable firmware. The default firmware that shipped with your router is a good place to start (generally available from the manufacturer's website). Otherwise, a stable release of your favorite embedded Linux distribution is a good alternative.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>If you haven't already, [[<ins class="diffchange diffchange-inline">HOWTO:Backup_your_router|</ins>backup your router's configuration]]. Hopefully you did this earlier so you can restore to a "known good" working state. If you didn't, it is still a good idea to do that now; it can always get worse. You'll also want to grab yourself a copy of some reliable firmware. The default firmware that shipped with your router is a good place to start (generally available from the manufacturer's website). Otherwise, a stable release of your favorite embedded Linux distribution is a good alternative.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Factory Reset ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== Factory Reset ==</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l163" >Line 163:</td>
<td colspan="2" class="diff-lineno">Line 163:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Transplant Another Router's CFE ====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Transplant Another Router's CFE ====</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>If you have the original CFE for this exact router, skip ahead to the next section. Otherwise, start by cloning the CFE of your good router using [[<del class="diffchange diffchange-inline">backup your router </del>| the usual methods]]. </div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>If you have the original CFE for this exact router, skip ahead to the next section. Otherwise, start by cloning the CFE of your good router using [[<ins class="diffchange diffchange-inline">HOWTO:Backup_your_router</ins>|the usual methods]]. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>There are a few CFE variables unique to each router. For the WRT54GL, see our [[flash memory]] page for specific locations. There should be a unique identifier and a pair of cryptography keys as well as the device MAC addresses. We're primarily concerned with the MAC address of the first physical Ethernet interface, but feel free to update the others as well. For the WRT54GL, 0x1E00 contains the MAC address used by the CFE at boot time. While you can override this setting later for your kernel in your local network configuration or NVRAM, you can't fool the bootloader (well you can, but not persistently). Especially, if you are running a pseudo-static DHCP configuration for a pool of backends, you'll get lots of network conflicts during the boot process unless this is set correctly. For the WRT54GL, this MAC address should match the one on the bottom sticker. Other routers have various schemes/offsets for what the address should be relative to the one printed on the case depending on how many physical interfaces the unit has and how the manufacturer chose to allocate the addresses. If you are feeling ambitious, you can update the default NVRAM settings in the CFE backup location so they are correct when you do a factory reset. Alternatively, these can always be corrected later using the NVRAM utilities. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>There are a few CFE variables unique to each router. For the WRT54GL, see our [[flash memory]] page for specific locations. There should be a unique identifier and a pair of cryptography keys as well as the device MAC addresses. We're primarily concerned with the MAC address of the first physical Ethernet interface, but feel free to update the others as well. For the WRT54GL, 0x1E00 contains the MAC address used by the CFE at boot time. While you can override this setting later for your kernel in your local network configuration or NVRAM, you can't fool the bootloader (well you can, but not persistently). Especially, if you are running a pseudo-static DHCP configuration for a pool of backends, you'll get lots of network conflicts during the boot process unless this is set correctly. For the WRT54GL, this MAC address should match the one on the bottom sticker. Other routers have various schemes/offsets for what the address should be relative to the one printed on the case depending on how many physical interfaces the unit has and how the manufacturer chose to allocate the addresses. If you are feeling ambitious, you can update the default NVRAM settings in the CFE backup location so they are correct when you do a factory reset. Alternatively, these can always be corrected later using the NVRAM utilities. </div></td></tr>
</table>Kpersohnhttps://xinu.cs.mu.edu/index.php?title=Router_Recovery&diff=3887&oldid=prevKpersohn at 15:23, 21 June 20112011-06-21T15:23:26Z<p></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 15:23, 21 June 2011</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l167" >Line 167:</td>
<td colspan="2" class="diff-lineno">Line 167:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>There are a few CFE variables unique to each router. For the WRT54GL, see our [[flash memory]] page for specific locations. There should be a unique identifier and a pair of cryptography keys as well as the device MAC addresses. We're primarily concerned with the MAC address of the first physical Ethernet interface, but feel free to update the others as well. For the WRT54GL, 0x1E00 contains the MAC address used by the CFE at boot time. While you can override this setting later for your kernel in your local network configuration or NVRAM, you can't fool the bootloader (well you can, but not persistently). Especially, if you are running a pseudo-static DHCP configuration for a pool of backends, you'll get lots of network conflicts during the boot process unless this is set correctly. For the WRT54GL, this MAC address should match the one on the bottom sticker. Other routers have various schemes/offsets for what the address should be relative to the one printed on the case depending on how many physical interfaces the unit has and how the manufacturer chose to allocate the addresses. If you are feeling ambitious, you can update the default NVRAM settings in the CFE backup location so they are correct when you do a factory reset. Alternatively, these can always be corrected later using the NVRAM utilities. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>There are a few CFE variables unique to each router. For the WRT54GL, see our [[flash memory]] page for specific locations. There should be a unique identifier and a pair of cryptography keys as well as the device MAC addresses. We're primarily concerned with the MAC address of the first physical Ethernet interface, but feel free to update the others as well. For the WRT54GL, 0x1E00 contains the MAC address used by the CFE at boot time. While you can override this setting later for your kernel in your local network configuration or NVRAM, you can't fool the bootloader (well you can, but not persistently). Especially, if you are running a pseudo-static DHCP configuration for a pool of backends, you'll get lots of network conflicts during the boot process unless this is set correctly. For the WRT54GL, this MAC address should match the one on the bottom sticker. Other routers have various schemes/offsets for what the address should be relative to the one printed on the case depending on how many physical interfaces the unit has and how the manufacturer chose to allocate the addresses. If you are feeling ambitious, you can update the default NVRAM settings in the CFE backup location so they are correct when you do a factory reset. Alternatively, these can always be corrected later using the NVRAM utilities. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>To edit the CFE, fire up your favorite hex editor and tweak each location as necessary. We happen to like <tt>shed</tt>, which has a nice <tt>nano</tt> like interface. Note that with <tt>shed</tt> your changes are affecting the file directly as you make them. There is no "quit without saving" option. It is always a good idea to make a copy of the CFE.BIN file you are planning to edit so you can revert to the original without having to grab it off the good router again<del class="diffchange diffchange-inline">. Speaking of which, if you haven't renamed your CFE binary to CFE.BIN, you should. TJTAG isn't advanced enough to allow you to specify a file so it will automatically be looking for CFE.BIN in the local directory when you go to write the image to flash on the broken router</del>. </div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>To edit the CFE, fire up your favorite hex editor and tweak each location as necessary. We happen to like <tt>shed</tt>, which has a nice <tt>nano</tt> like interface. Note that with <tt>shed</tt> your changes are affecting the file directly as you make them. There is no "quit without saving" option. It is always a good idea to make a copy of the CFE.BIN file you are planning to edit so you can revert to the original without having to grab it off the good router again.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Example:</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Example:</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l203" >Line 203:</td>
<td colspan="2" class="diff-lineno">Line 203:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Using the Same Router's Backup ====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Using the Same Router's Backup ====</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Copy your CFE binary to a file called CFE.BIN in the same directory as the TJTAG executable. You don't have a choice for what file TJTAG reads in. When you are ready to write it to the router, once again make sure you know which TJTAG switches keep your particular router happy.</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Example:</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"><code><pre>user@host:tjtag$ ./tjtag -flash:cfe /wiggler /noemw /noreset</pre></code></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Now, go get a cup of coffee or take a power nap. Bit-banging a few hundred kilobytes with a parallel interface can take awhile. You should see exactly what TJTAG is writing to flash whirring by as well as the percentage written slowly increasing. Sometimes the watchdog timer doesn't disable correctly and you have to try this a few times before it will keep going. If it going to fail usually this happens within the first few seconds. </ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">A fresh CFE should fix most stubborn routers that aren't physically damaged, but we make no guarantees. Your mileage may vary. Hopefully you have your serial console back and you can proceed to restoring a new kernel. If your router is still unresponsive, unfortunately we have no more advice for you. It is probably time to invest in a new one. </ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== External References ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== External References ==</div></td></tr>
</table>Kpersohnhttps://xinu.cs.mu.edu/index.php?title=Router_Recovery&diff=3886&oldid=prevKpersohn: /* Transplant Another Router's CFE */2011-06-21T15:04:05Z<p><span dir="auto"><span class="autocomment">Transplant Another Router's CFE</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 15:04, 21 June 2011</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l165" >Line 165:</td>
<td colspan="2" class="diff-lineno">Line 165:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>If you have the original CFE for this exact router, skip ahead to the next section. Otherwise, start by cloning the CFE of your good router using [[backup your router | the usual methods]]. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>If you have the original CFE for this exact router, skip ahead to the next section. Otherwise, start by cloning the CFE of your good router using [[backup your router | the usual methods]]. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>There are a few CFE variables unique to each router. For the WRT54GL, see our [[flash memory]] page for specific locations. There should be a unique identifier and a pair of cryptography keys as well as the device MAC addresses. We're primarily concerned with the MAC address of the first physical Ethernet interface, but feel free to update the others as well. For the WRT54GL, 0x1E00 contains the MAC address used by the CFE at boot time. While you can override this setting later for your kernel in your local network configuration or NVRAM, you can't fool the bootloader. Especially, if you are running a pseudo-static DHCP configuration for a pool of backends, you'll get lots of network conflicts during the boot process unless this is set correctly. For the WRT54GL, this MAC address should match the one on the bottom sticker. Other routers have various schemes/offsets for what the address should be relative to the one printed on the case depending on how many physical interfaces the unit has and how the manufacturer chose to allocate the addresses. If you are feeling ambitious, you can update the default NVRAM settings in the CFE backup location so they are correct when you do a factory reset. Alternatively, these can always be corrected later using the NVRAM utilities. </div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>There are a few CFE variables unique to each router. For the WRT54GL, see our [[flash memory]] page for specific locations. There should be a unique identifier and a pair of cryptography keys as well as the device MAC addresses. We're primarily concerned with the MAC address of the first physical Ethernet interface, but feel free to update the others as well. For the WRT54GL, 0x1E00 contains the MAC address used by the CFE at boot time. While you can override this setting later for your kernel in your local network configuration or NVRAM, you can't fool the bootloader <ins class="diffchange diffchange-inline">(well you can, but not persistently)</ins>. Especially, if you are running a pseudo-static DHCP configuration for a pool of backends, you'll get lots of network conflicts during the boot process unless this is set correctly. For the WRT54GL, this MAC address should match the one on the bottom sticker. Other routers have various schemes/offsets for what the address should be relative to the one printed on the case depending on how many physical interfaces the unit has and how the manufacturer chose to allocate the addresses. If you are feeling ambitious, you can update the default NVRAM settings in the CFE backup location so they are correct when you do a factory reset. Alternatively, these can always be corrected later using the NVRAM utilities. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To edit the CFE, fire up your favorite hex editor and tweak each location as necessary. We happen to like <tt>shed</tt>, which has a nice <tt>nano</tt> like interface. Note that with <tt>shed</tt> your changes are affecting the file directly as you make them. There is no "quit without saving" option. It is always a good idea to make a copy of the CFE.BIN file you are planning to edit so you can revert to the original without having to grab it off the good router again. Speaking of which, if you haven't renamed your CFE binary to CFE.BIN, you should. TJTAG isn't advanced enough to allow you to specify a file so it will automatically be looking for CFE.BIN in the local directory when you go to write the image to flash on the broken router. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To edit the CFE, fire up your favorite hex editor and tweak each location as necessary. We happen to like <tt>shed</tt>, which has a nice <tt>nano</tt> like interface. Note that with <tt>shed</tt> your changes are affecting the file directly as you make them. There is no "quit without saving" option. It is always a good idea to make a copy of the CFE.BIN file you are planning to edit so you can revert to the original without having to grab it off the good router again. Speaking of which, if you haven't renamed your CFE binary to CFE.BIN, you should. TJTAG isn't advanced enough to allow you to specify a file so it will automatically be looking for CFE.BIN in the local directory when you go to write the image to flash on the broken router. </div></td></tr>
</table>Kpersohnhttps://xinu.cs.mu.edu/index.php?title=Router_Recovery&diff=3885&oldid=prevKpersohn: /* JTAG */2011-06-21T14:55:15Z<p><span dir="auto"><span class="autocomment">JTAG</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 14:55, 21 June 2011</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l25" >Line 25:</td>
<td colspan="2" class="diff-lineno">Line 25:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== JTAG ==</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>== JTAG ==</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>In a nutshell, JTAG is <del class="diffchange diffchange-inline">a </del>interface that allows external control of an SoC and its memory. You can read more about this on our [[EJTAG]] page. JTAG allows us to recover routers that are completely unresponsive (aka debricking). Before continuing, you'll need a JTAG cable (active or passive will do) and a header soldered to the JTAG connector on your router. See the references below for some suggestions on this bit.</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>In a nutshell, JTAG is <ins class="diffchange diffchange-inline">an external </ins>interface that allows external control of an SoC and its memory. You can read more about this on our [[EJTAG]] page. JTAG allows us to recover routers that are completely unresponsive (aka debricking). Before continuing, you'll need a JTAG cable (active or passive will do) and a header soldered to the JTAG connector on your router. See the references below for some suggestions on this bit.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Software ===</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>=== Software ===</div></td></tr>
</table>Kpersohnhttps://xinu.cs.mu.edu/index.php?title=Router_Recovery&diff=3884&oldid=prevKpersohn: /* Transplant Another Router's CFE */2011-06-21T14:46:05Z<p><span dir="auto"><span class="autocomment">Transplant Another Router's CFE</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 14:46, 21 June 2011</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l167" >Line 167:</td>
<td colspan="2" class="diff-lineno">Line 167:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>There are a few CFE variables unique to each router. For the WRT54GL, see our [[flash memory]] page for specific locations. There should be a unique identifier and a pair of cryptography keys as well as the device MAC addresses. We're primarily concerned with the MAC address of the first physical Ethernet interface, but feel free to update the others as well. For the WRT54GL, 0x1E00 contains the MAC address used by the CFE at boot time. While you can override this setting later for your kernel in your local network configuration or NVRAM, you can't fool the bootloader. Especially, if you are running a pseudo-static DHCP configuration for a pool of backends, you'll get lots of network conflicts during the boot process unless this is set correctly. For the WRT54GL, this MAC address should match the one on the bottom sticker. Other routers have various schemes/offsets for what the address should be relative to the one printed on the case depending on how many physical interfaces the unit has and how the manufacturer chose to allocate the addresses. If you are feeling ambitious, you can update the default NVRAM settings in the CFE backup location so they are correct when you do a factory reset. Alternatively, these can always be corrected later using the NVRAM utilities. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>There are a few CFE variables unique to each router. For the WRT54GL, see our [[flash memory]] page for specific locations. There should be a unique identifier and a pair of cryptography keys as well as the device MAC addresses. We're primarily concerned with the MAC address of the first physical Ethernet interface, but feel free to update the others as well. For the WRT54GL, 0x1E00 contains the MAC address used by the CFE at boot time. While you can override this setting later for your kernel in your local network configuration or NVRAM, you can't fool the bootloader. Especially, if you are running a pseudo-static DHCP configuration for a pool of backends, you'll get lots of network conflicts during the boot process unless this is set correctly. For the WRT54GL, this MAC address should match the one on the bottom sticker. Other routers have various schemes/offsets for what the address should be relative to the one printed on the case depending on how many physical interfaces the unit has and how the manufacturer chose to allocate the addresses. If you are feeling ambitious, you can update the default NVRAM settings in the CFE backup location so they are correct when you do a factory reset. Alternatively, these can always be corrected later using the NVRAM utilities. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>To edit the CFE, fire up your favorite hex editor and tweak each location as necessary. We happen to like <tt>shed</tt>, which has a nice <tt>nano</tt> like interface. Note that with <tt>shed</tt> your changes are affecting the file directly as you make them. There is no "quit without saving" option. It is always a good idea to make a copy of the CFE.BIN file you are planning to edit so you can revert to the original without having to grab it off the good router again. Speaking of which, if you haven't renamed your CFE binary to CFE.BIN, you should. TJTAG isn't advanced enough to allow you to specify a file so it will automatically be looking for <del class="diffchange diffchange-inline">that filename </del>when you go to write the image to flash on the broken router. </div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>To edit the CFE, fire up your favorite hex editor and tweak each location as necessary. We happen to like <tt>shed</tt>, which has a nice <tt>nano</tt> like interface. Note that with <tt>shed</tt> your changes are affecting the file directly as you make them. There is no "quit without saving" option. It is always a good idea to make a copy of the CFE.BIN file you are planning to edit so you can revert to the original without having to grab it off the good router again. Speaking of which, if you haven't renamed your CFE binary to CFE.BIN, you should. TJTAG isn't advanced enough to allow you to specify a file so it will automatically be looking for <ins class="diffchange diffchange-inline">CFE.BIN in the local directory </ins>when you go to write the image to flash on the broken router. </div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Example:</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Example:</div></td></tr>
</table>Kpersohnhttps://xinu.cs.mu.edu/index.php?title=Router_Recovery&diff=3883&oldid=prevKpersohn: /* Transplant Another Router's CFE */2011-06-21T14:36:45Z<p><span dir="auto"><span class="autocomment">Transplant Another Router's CFE</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 14:36, 21 June 2011</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l200" >Line 200:</td>
<td colspan="2" class="diff-lineno">Line 200:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div></pre></code></div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div></pre></code></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>You should now have a CFE.BIN file with the correct MAC address(es) ready for flashing!</div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>You should now have a CFE.BIN file with the correct MAC address(es) ready for flashing! <ins class="diffchange diffchange-inline">Proceed to the instructions below as if you had a correct backup all along.</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Using the Same Router's Backup ====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Using the Same Router's Backup ====</div></td></tr>
</table>Kpersohnhttps://xinu.cs.mu.edu/index.php?title=Router_Recovery&diff=3882&oldid=prevKpersohn: /* External References */2011-06-21T14:35:51Z<p><span dir="auto"><span class="autocomment">External References</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 14:35, 21 June 2011</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l209" >Line 209:</td>
<td colspan="2" class="diff-lineno">Line 209:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [http://www.tiaowiki.com/download//category.php?id=8 TJTAG Download]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [http://www.tiaowiki.com/download//category.php?id=8 TJTAG Download]</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [http://www.tiaowiki.com/w/Debrick_Routers_Using_JTAG_Cable TIAO Wiki Debrick Guide]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>* [http://www.tiaowiki.com/w/Debrick_Routers_Using_JTAG_Cable TIAO Wiki Debrick Guide]</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">* [http://sourceforge.net/projects/shed/ Shed] (Simple Hex Editor)</ins></div></td></tr>
</table>Kpersohnhttps://xinu.cs.mu.edu/index.php?title=Router_Recovery&diff=3881&oldid=prevKpersohn: /* Transplant Another Router's CFE */2011-06-21T14:35:15Z<p><span dir="auto"><span class="autocomment">Transplant Another Router's CFE</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 14:35, 21 June 2011</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l170" >Line 170:</td>
<td colspan="2" class="diff-lineno">Line 170:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Example:</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Example:</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><code><<del class="diffchange diffchange-inline">/</del>pre></div></td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><code><pre></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>offset asc hex dec oct bin</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>offset asc hex dec oct bin</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>00001DFE: 00 000 000 00000000</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>00001DFE: 00 000 000 00000000</div></td></tr>
</table>Kpersohnhttps://xinu.cs.mu.edu/index.php?title=Router_Recovery&diff=3880&oldid=prevKpersohn: /* Transplant Another Router's CFE */2011-06-21T14:34:14Z<p><span dir="auto"><span class="autocomment">Transplant Another Router's CFE</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 14:34, 21 June 2011</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l168" >Line 168:</td>
<td colspan="2" class="diff-lineno">Line 168:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To edit the CFE, fire up your favorite hex editor and tweak each location as necessary. We happen to like <tt>shed</tt>, which has a nice <tt>nano</tt> like interface. Note that with <tt>shed</tt> your changes are affecting the file directly as you make them. There is no "quit without saving" option. It is always a good idea to make a copy of the CFE.BIN file you are planning to edit so you can revert to the original without having to grab it off the good router again. Speaking of which, if you haven't renamed your CFE binary to CFE.BIN, you should. TJTAG isn't advanced enough to allow you to specify a file so it will automatically be looking for that filename when you go to write the image to flash on the broken router. </div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To edit the CFE, fire up your favorite hex editor and tweak each location as necessary. We happen to like <tt>shed</tt>, which has a nice <tt>nano</tt> like interface. Note that with <tt>shed</tt> your changes are affecting the file directly as you make them. There is no "quit without saving" option. It is always a good idea to make a copy of the CFE.BIN file you are planning to edit so you can revert to the original without having to grab it off the good router again. Speaking of which, if you haven't renamed your CFE binary to CFE.BIN, you should. TJTAG isn't advanced enough to allow you to specify a file so it will automatically be looking for that filename when you go to write the image to flash on the broken router. </div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Example:</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"><code></pre></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">offset asc hex dec oct bin</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001DFE: 00 000 000 00000000</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001DFF: 00 000 000 00000000</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E00: C 43 067 103 01000011</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E01: 0 30 048 060 00110000</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E02: : 3A 058 072 00111010</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E03: F 46 070 106 01000110</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E04: F 46 070 106 01000110</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E05: : 3A 058 072 00111010</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E06: E 45 069 105 01000101</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E07: E 45 069 105 01000101</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E08: : 3A 058 072 00111010</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E09: C 43 067 103 01000011</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E0A: 0 30 048 060 00110000</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E0B: : 3A 058 072 00111010</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E0C: F 46 070 106 01000110</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E0D: F 46 070 106 01000110</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E0E: : 3A 058 072 00111010</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E0F: E 45 069 105 01000101</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E10: E 45 069 105 01000101</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E11: 00 000 000 00000000</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E12: FF 255 377 11111111</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E13: FF 255 377 11111111</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">00001E14: FF 255 377 11111111</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"> 1E00/40000 (hex) </ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">SPACE|E edit S|W|F search J jump to T dec/hex D dump 1|2|4 cursor</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">X exit R|N repeat B bin edit A ext. asc P preview ` endian</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></pre></code></ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You should now have a CFE.BIN file with the correct MAC address(es) ready for flashing!</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You should now have a CFE.BIN file with the correct MAC address(es) ready for flashing!</div></td></tr>
</table>Kpersohnhttps://xinu.cs.mu.edu/index.php?title=Router_Recovery&diff=3879&oldid=prevKpersohn: /* Transplant Another Router's CFE */2011-06-21T14:27:52Z<p><span dir="auto"><span class="autocomment">Transplant Another Router's CFE</span></span></p>
<table class="diff diff-contentalign-left" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en">
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #222; text-align: center;">Revision as of 14:27, 21 June 2011</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l163" >Line 163:</td>
<td colspan="2" class="diff-lineno">Line 163:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Transplant Another Router's CFE ====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Transplant Another Router's CFE ====</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">If you have the original CFE for this exact router, skip ahead to the next section. Otherwise, start by cloning the CFE of your good router using [[backup your router | the usual methods]]. </ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">There are a few CFE variables unique to each router. For the WRT54GL, see our [[flash memory]] page for specific locations. There should be a unique identifier and a pair of cryptography keys as well as the device MAC addresses. We're primarily concerned with the MAC address of the first physical Ethernet interface, but feel free to update the others as well. For the WRT54GL, 0x1E00 contains the MAC address used by the CFE at boot time. While you can override this setting later for your kernel in your local network configuration or NVRAM, you can't fool the bootloader. Especially, if you are running a pseudo-static DHCP configuration for a pool of backends, you'll get lots of network conflicts during the boot process unless this is set correctly. For the WRT54GL, this MAC address should match the one on the bottom sticker. Other routers have various schemes/offsets for what the address should be relative to the one printed on the case depending on how many physical interfaces the unit has and how the manufacturer chose to allocate the addresses. If you are feeling ambitious, you can update the default NVRAM settings in the CFE backup location so they are correct when you do a factory reset. Alternatively, these can always be corrected later using the NVRAM utilities. </ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">To edit the CFE, fire up your favorite hex editor and tweak each location as necessary. We happen to like <tt>shed</tt>, which has a nice <tt>nano</tt> like interface. Note that with <tt>shed</tt> your changes are affecting the file directly as you make them. There is no "quit without saving" option. It is always a good idea to make a copy of the CFE.BIN file you are planning to edit so you can revert to the original without having to grab it off the good router again. Speaking of which, if you haven't renamed your CFE binary to CFE.BIN, you should. TJTAG isn't advanced enough to allow you to specify a file so it will automatically be looking for that filename when you go to write the image to flash on the broken router. </ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">You should now have a CFE.BIN file with the correct MAC address(es) ready for flashing!</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Using the Same Router's Backup ====</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #222; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>==== Using the Same Router's Backup ====</div></td></tr>
</table>Kpersohn