TRX header

From Embedded Xinu
Revision as of 20:44, 16 June 2011 by Kpersohn (talk | contribs)
Jump to navigation Jump to search

TRX is the format used to store kernel images in Flash memory for CFE based (and possibly others) routers. Unfortunately, not much is known about the format or what limitations and rules exist. Currently, Embedded Xinu uses a simple utility from the OpenWRT repository to build TRX images. However, the quality of our TRX images seems to vary between revisions of the operating system. We do not yet know why. Possible reasons include:

  • alignment problems,
  • compression/extraction problems,
  • incorrectly configuration at startup (differences between TFTP booting and booting from Flash), or a
  • combination of above and some unknown problem.

What we do know is the format of the 28 byte TRX header, it is as follows:

 0                   1                   2                   3   
 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 
+---------------------------------------------------------------+
|                     magic number ('HDR0')                     |
+---------------------------------------------------------------+
|                  length (header size + data)                  |
+---------------+---------------+-------------------------------+
|                       32-bit CRC value                        |
+---------------+---------------+-------------------------------+
|           TRX flags           |          TRX version          |
+-------------------------------+-------------------------------+
|                      Partition offset[0]                      |
+---------------------------------------------------------------+
|                      Partition offset[1]                      |
+---------------------------------------------------------------+
|                      Partition offset[2]                      |
+---------------------------------------------------------------+

After the TRX header, the data section begins.

Code Pattern

It is common to see an additional 32 byte header prepended to the TRX image as a way to tag certain firmware images specific to a particular hardware platform. The first 4 bytes correspond to an ASCII "Code Pattern" that makes this identification. For example, the WRT54G series routers (including the WRT54GL) contain the characters W54G as the first field in this additional header. Some methods of writing to flash, such as the Linksys Web GUI and TFTP, check for this pattern before actually writing the firmware. The flash process will error out when attempting to flash a router without the correct code pattern using these methods. When the code pattern header is present, filenames traditionally have the .bin extension instead of .trx.

Our TRX image creation process for Xinu uses the [[1]] utility from OpenWrt to add the correct pattern to our TRX file. This utility also supports additional fields in the code pattern header: dates, versions, board ID, and flags.