Difference between revisions of "XinuPhone"
|Line 48:||Line 48:|
== Future Work ==
== Future Work ==
Revision as of 23:31, 5 June 2012
XinuPhone is an innovative hardware/software platform for Internet telephony education and research. In the classroom, XinuPhone promotes hands-on interactive learning that is both cross-discipline and application oriented. As a research tool, XinuPhone is a versatile and open-source platform useful for benchmarking experimental methods against industry standards. Furthermore, the XinuPhone platform features inexpensive commodity hardware that is easy to assemble making it an idea choice for users on tight budgets and in diverse educational backgrounds.
How It Works
Most of the Embedded Xinu supported platforms do not have the ability to directly sample analog signals or reconstruct analog waveforms from digital bitstreams. Likewise, typical digital signal processing (DSP) chips lack Ethernet networking hardware and protocol support. XinuPhone pairs a simple external sampling module with a network-enabled backend running the Embedded Xinu operating system in order to provide both functionalities.
The XinuPhone audio module consists of filters, a digital signal controller (DSC), an audio amplifier, and a serial transceiver. Speech first passes through an analog low-pass anti-aliasing filter before it enters the analog to digital converter (ADC) on the DSC. The DSC can be programed with a variety of software CODECs that compress the sampled audio for efficient transmission across the serial bus. The serial transceiver allows the audio module to interface directly with an RS-232 capable network device, such as a slightly modified Linksys WRT54GL router. The audio module sends serial samples to the network device; then, the Embedded Xinu operating system VoIP tools packetize the serial data and send the voice packets to a remote host. On the receiving end, another network device buffers incoming packets and translates the payloads back into a stream of serial data. The external audio module uses the same CODECs to uncompress the serial data back into raw audio samples. Lastly, a digital to analog converter (DAC) on-board the DSC converts the audio samples back to an analog waveform that can be amplified and played back.
You can build your own XinuPhone with readily available discrete components!
Sheet 1 shows the basic DSC core, power supply, crystal oscillator, debug interface, and serial transceiver connections.
Sheet 2 illustrates the headphone amplifier, microphone pre-amplifier, and low-pass anti-aliasing filter.
Click on the sheet for a higher resolution image or see the downloads below for a PDF rendering.
- Components are specified to EIA E96 standard values for resistors (1% tolerance) and E24 values for capacitors.
- For capacitors in the audio path, temperature coefficient X7R, NP0, C0G, or better are recommended.
|File||Download Link||Checksum (SHA1)|
|XinuPhone Firmware 1.0 (Binary+Source)||gzip||8aa4b4d7ed38c4c641e920905aabfee1a9d2dbc0|
|XinuPhone Hardware Schematic Rev 2.1||a0f07d543f2b85440c31daa7d530066f682a8a5a|
|Embedded Xinu Operating System||url|
- Interactive Real-Time Embedded Systems Education Infused with Applied Internet Telephony. Kyle Persohn, Dennis Brylow. COMPSAC 2011: Proceedings of 35th IEEE Computer Software and Applications Conference, pages 199-204, Munich, Germany, July 2011. link
- Teaching With Xinu
- Real-Time Transport Protocol support in Embedded Xinu
- Analog Telephone Adapter (ATA) interface
- Simple XinuPhone discovery protocol / address book
Some additional resources you may find useful
Standards & RFCs
- ITU-T Test Signals for Telecommunication Systems
- ITU-T G.711 - Pulse Code Modulation (PCM) of Voice Frequencies
- RFC 3550 - RTP: A Transport Protocol for Real-Time Applications