XinuPhone

From Embedded Xinu
Jump to navigation Jump to search

XinuPhone is an innovative hardware/software platform for Internet telephony education and research. In the classroom, XinuPhone promotes hands-on interactive learning that is both cross-discipline and application oriented. As a research tool, XinuPhone is a versatile and open-source platform useful for benchmarking experimental methods against industry standards. Furthermore, the XinuPhone platform features inexpensive commodity hardware that is easy to assemble making it an idea choice for users on tight budgets and in diverse educational backgrounds.

Xinuphone-system.jpg

How It Works

Most of the Embedded Xinu supported platforms do not have the ability to directly sample analog signals or reconstruct analog waveforms from digital bitstreams. Likewise, typical digital signal processing (DSP) chips lack Ethernet networking hardware and protocol support. XinuPhone pairs a simple external sampling module with a network-enabled backend running the Embedded Xinu operating system in order to provide both functionalities.

The XinuPhone audio module consists of filters, a digital signal controller (DSC), an audio amplifier, and a serial transceiver. Speech first passes through an analog low-pass anti-aliasing filter before it enters the analog to digital converter (ADC) on the DSC. The DSC can be programed with a variety of software CODECs that compress the sampled audio for efficient transmission across the serial bus. The serial transceiver allows the audio module to interface directly with an RS-232 capable network device, such as a slightly modified Linksys WRT54GL router. The audio module sends serial samples to the network device; then, the Embedded Xinu operating system VoIP tools packetize the serial data and send the voice packets to a remote host. On the receiving end, another network device buffers incoming packets and translates the payloads back into a stream of serial data. The external audio module uses the same CODECs to uncompress the serial data back into raw audio samples. Lastly, a digital to analog converter (DAC) on-board the DSC converts the audio samples back to an analog waveform that can be amplified and played back.

Hardware

You can build your own XinuPhone with readily available discrete components!

Schematics

Xinuphone-schematic-page1.png

Sheet 1 shows the basic DSC core, power supply, crystal oscillator, debug interface, and serial transceiver connections.


Xinuphone-schematic-page2.png

Sheet 2 illustrates the headphone amplifier, microphone pre-amplifier, and low-pass anti-aliasing filter.

Click on the sheet for a higher resolution image or see the downloads below for a PDF rendering.

Design Notes

  • Components are specified to EIA E96 standard values for resistors (1% tolerance) and E24 values for capacitors.
  • For capacitors in the audio path, temperature coefficient X7R, NP0, C0G, or better are recommended.

Downloads

File Download Link Checksum (SHA1)
XinuPhone Firmware 1.0 (Binary+Source) gzip 8aa4b4d7ed38c4c641e920905aabfee1a9d2dbc0
bzip2 6ecfecbb9d9bc399b961d0764923ce609b4c569a
XinuPhone Hardware Schematic Rev 2.1 pdf a0f07d543f2b85440c31daa7d530066f682a8a5a
Embedded Xinu Operating System url

Future Work

  • Real-Time Transport Protocol support in Embedded Xinu
  • Analog Telephone Adapter (ATA) interface
  • Simple XinuPhone discovery protocol / address book

External Links

Some additional resources you may find useful

Microchip

Standards & RFCs

PCB Fabrication